40_
maintain
Cleaning the Dust Bin and the Filters
First, empty the dust bin before cleaning it.
■
When separating the dust bin, take care not to spill the dust out of the
dust bin.
■
Empty the dust bin in the following cases.
1.
When dust has accumulated inside the dust bin.
2.
When the suction power suddenly becomes weak.
3.
When the noise suddenly increases.
1.
Press the Dust Bin Eject (PUSH) button and pull the dust bin to
separate the dust bin.
2.
Open the Dust Bin cover in the direction of the arrow and
remove the filter.
3.
Please separate the mesh filter from filter and remove the
sponge filter.
4.
Clean dust from dust bin, filter, sponge and mesh filters.
❈
You can clean it with water.
After cleaning it with water :
1.
Dustbin : Wipe the water off completely.
2.
Filter, sponge and mesh filters: Dry the filters completely
in an airy place out of the sun before putting them
together.
5.
Please insert the sponge filter to the filter first and then put
mesh filter together before putting the filters in the dust bin.
If the dustbin is assembled without the filter being mounted,
the error code C08 occurs.
Make sure to mount the filter.
6.
Close the dust bin cover and install it into the main unit.
NOTE
CAUTION
Filter
Sponge filter
Mesh filter
DJ68-00630D (EN)-00.indd 40
2014. 7. 23. �� 6:14
Summary of Contents for SR8980
Page 59: ...Memo...
