operating
_23
03
OPERA
TING
Installing the Charger (station)
1.
Install the charger on a flat surface.
2.
There should be no obstacles and cliffs 0.5m to the left and
right and within 1 m of the front.
3.
Install the Charger (station) in a location where it can be easily
accessed by the Robot vacuum.
4.
Arrange the power cord along the wall.
5.
When the floor is made of wood, install the Charger (station) in
the same direction as the grain of the wood.
NOTE
Always keep the power cord of the Charger (station)
plugged into the power outlet.
- If no power is supplied to the charger, the Robot vacuum
will not be able to find the charger and will not be able to
charge automatically.
- If the Robot vacuum is separated from the charger, the
battery is automatically discharged.
Power lamp
Charging lamp
about 1m
about 0.5m
about 0.5m
DJ68-00630D (EN)-00.indd 23
2014. 7. 23. �� 6:14
Summary of Contents for SR8980
Page 59: ...Memo...