NETWORK PTZ CAMERA
User Manual
94
Chapter 4. Using Web Viewer
◊
Digital In(Sensor) Setup
※
S1: Sensor 1, S2: Sensor 2, S3: Sensor 3, S4: Sensor 4
Category
Description
Use.
Check to use a sensor.
Type
“Normal Open” and “Normal Close” are available choices when selecting the type for a
connected sensor.
4.2.3.3. Alarm Sensor
Configure the options to use the Alarm services by attaching a sensor to the camera.
◊
Digital Out(Relay/Alarm) Setup
Category
Description
Relay
Select a digital output (Relay1 or Relay2) when certain events are detected: sensor
(S1~4), motion detection (MD), or video analytics(VA).
For Dur (Duration), select a duration for which to activate a selected relay upon the
occurrence of an event.
Sequence
Mode
Preset : Performs Auto Run to a preset number in the NUM pane. (Refer to 4.2.2 PTZ Page.)
Swing : Performs Auto Run in a selected Swing mode. (Refer to 4.2.2 PTZ Page.)
Group : Performs Auto Run in a selected Group mode. (Refer to 4.2.2 PTZ Page.)
Tour : Performs Auto Run in a selected Tour Search mode. (Refer to 4.2.2 PTZ Page.)
Trace : Performs Auto Run in a selected Trace mode. (Refer to 4.2.2 PTZ Page.)
NUM In the Preset mode, Number is used to set up preset numbers.
