NETWORK PTZ CAMERA
User Manual
34
Chapter 3. Installing Camera & Network Setup
•
How to Set Up Install Base
1. Open Hinged Door
As shown in the picture below,
gently press and lift up the handle
of the hinged door on the bottom of
the install base.
2. Connect Terminal Wires
Connect each wire to the pertinent
terminal block.
For more detailed instructions,
please refer to the “
Camera Wiring
Interface Board
” on Page 16.
Once all the wires are connected,
close the hinged door.
• Make sure to first hook the camera's safety cable to the mount before proceeding. Otherwise you may
be exposed to serious injury caused by a fallen camera.
Caution
Knob
Audio IN/OUT
Lan
Video Output
On-wall Mount Type Installation Example
