NETWORK PTZ CAMERA
User Manual
84
Chapter 4. Using Web Viewer
Auto Release
Enables setting a maximum duration to follow an object. When the duration
expires, the camera stops following the object and returns to the start position to
follow another objects.
Auto
Return
Off
Commands the camera to stay on the location the last object stopped at instead
of returning to the initial position.
Time
Setting
Sets a duration for the camera to standby upon the Auto Release expiration and
then return to the start position.
Indicator
Off
Disables the Indicator function.
On
Indicates both the pointer and target.
Pointer
Indicates the indicator when following an object using the joystick; shows as a
cross in the center of the screen.
Target
Indicates the camera’s target for the Auto Track operation; when a moving object
is detected, a square grid appears and surrounds the object.
Lost Mode
Stop
Commands the camera to stop and abort tracking at the spot where its object
disappeared.
Research
Commands the camera to stop and standby at the spot where its object
disappeared.
Zoom Out Commands the camera to zoom out and look for a new object in case its current
object disappears.
■
Target Lock Setup
Target Lock is useful to select and follow an object using the Auto Track mode while operating
the camera with the joystick. Target Lock can be turned On or Off.
To activate the Auto Track mode, turn on Target Lock, select an object to follow, and then
press Enter.
■
Trace Zone Setup
Category
Description
Tracking Zone
Setup Tracking area.
Tracking Mask
Setup whether to show the set Mask area on screen.
