NETWORK PTZ CAMERA
User Manual
40
Chapter 3. Installing Camera & Network Setup
3. In the <
Address
> pane, provide the
necessary information.
MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable camera
will be set automatically so you don't need
to input it manually.
•
If using an IP router
IP Address : Enter an address falling in the
IP range provided by the IP router.
ex) 192.168.1.2~254, 192.168.0.2~254,
192.168.XXX.2~254
Subnet Mask : The <
Subnet Mask
> of the
IP router will be the <
Subnet Mask
> of the
camera.
Gateway : The <
Local IP Address
> of the IP
router will be the <
Gateway
> of the
camera
•
If not using an IP router
For setting <
IP Address
>, <
Subnet
Mask
>, and <
Gateway
>, contact your
network administrator.
4. In the <
Port
> pane, provide
necessary information.
HTTP Port : Used to access the camera
using the Internet browser, defaulted to 80.
Use the spin button to change the HTTP Port value.
VNP Port : Used to control the video signal transfer, defaulted to 4520.
• The settings may differ depending on the connected IP router model.
For more information, refer to the user manual of the applicable router.
Notes
