NETWORK PTZ CAMERA
User Manual
39
Item
Description
IPv4
Scans for cameras with the IPv4 setting.
IPv6
Scans for cameras with the IPv6 setting.
Search
Scans for cameras that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
The IP Installer automatically configures the network settings.
Manual Set
You should configure the network settings manually.
Exit
Exits the IP Installer program.
•
Manual Network Setup
Run <
IP Installer_v 1.44.exe
> to display the camera search list.
At the initial startup, both [
Auto Set
] and [
Manual Set
] will be grayed out.
1. Select a camera in the search list.
Find the MAC (Ethernet) address labeled on
the rear of the camera.
Both the [
Auto Set
] and [
Manual Set
]
buttons will be activated.
2. Click [
Manual Set
].
The Manual Setting dialog appears.
The default values of <
IP Address
>, <
Subnet
Mask
>, <
Gateway
>, <
HTTP
Port
> and
<
VNP
Port
> of the camera will be displayed.
The default <
Password
> is “
4321
”.
Static IP Setup
•
Use IP Installer version 1.44 or higher.
Notes
•
For cameras found with the IPv6 setting, these buttons will be grayed out
as the cameras do not support this function.
Notes
