Samsung Electronics
5.
C Frame Installation
◇ Half-cabinet Z-step adjustment
41
41
Fig.1 Step check point (2x2 case)
Fig.2 Securing the space between modules when controlling the step
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
3~4mm
- Each Half-Cabinate has eight height controls. (4 corners / 4 sides)
- Two Half-Cabinet Z-Step adjustments are as follows
① Check the corner of the Half-Cabette to check if there is a difference.
② If the necessary part is the outer part, turn the exposed sawtooth to adjust the step.
③ If the internal part of Half-Cabinet needs adjustment, move left and right to secure space for adjustment.
Up, left, and right 2mm can be moved between each half-cabinet.
④ Adjust the step by turning the sawtooth using the step control jig. It is possible to flow 1mm in one lap.
※ The product in the shipment state can no longer be lowered because the module is located on the lowest cross section and
can be adjusted by raising the height.
.
