Samsung SND-7080 User Manual Download Page 15

Page: 15 / 108

English

_15

●

INSTALLATION & CONNECTION

installation & connection

INSTALLATION (SND-7080)

Precautions before installation

Ensure you read out the following instructions before installing the camera:

Select an installation site (ceiling or wall) that can endure at least 5 times of the
camera weight.

Stuck-in or peeled-off cables can cause damage to the product or a fire.

For safety purposes, keep anyone else away from the installation site. And put aside
personal belongings from the site, just in case.

Disassembling

Take the camera body with one hand and take the top
cover with the other hand. Then, turn the cover counter
clockwise to remove it.

Hold down the lock lever in the outer direction as shown
and turn the camera body in the <

UNLOCK

> direction

(counter clockwise) to remove the bracket from the
body.

If it fails, take the bottom hole of the bracket and turn the
bracket in the <

LOCK

> direction (clockwise) to remove it.

•



Top cover

Camera Body

Bracket

Camera Body

Summary of Contents for SND-7080













































































































Search results

Summary of Contents for SND-7080

Reviews:

Related manuals for SND-7080

Brands by name

Popular brands

Samsung SND-7080, User Manual

Search results

Summary of Contents for SND-7080

Reviews:

Related manuals for SND-7080

Brands by name

Popular brands