background image

overview

4_

 overview

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 
THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC 
OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS 
ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects 
filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION

 : TO REDUCE THE RISK OF ELECTRIC SHOCK. 

DO NOT REMOVE COVER (OR BACK). 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of “dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude to constitute a 
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended 
to alert the user to the presence of important operating 
and maintenance (servicing) instructions in the literature 
accompanying the product. 

Summary of Contents for SND-7080













































































































Reviews: