Samsung SND-7080 User Manual Download Page 42

Page: 42 / 108

42_

web viewer

Item

Description

Screen
Optimization,
Full Screen

Adjust the screen to the optimal size, and display the Full Screen icon on the Live
screen.

Capture

Saves the snapshot as an image file in the .bmp format.

Video Format

You can select a profile type in <

Video profile

> under the <

Audio & Video

> setup

menu.

If the “Invalid codec” message is displayed, select a profile type from the profile
list again.

If the temperature drops below the operational range, video signal may not be produced. In such
cases, please wait for the video.

Web pages related to playback and setting menus are accessible only by the admin. For other
user accounts, the buttons will be deactivated.

To capture the snapshot

Click [

] on the scene to capture.

The Capture dialog should appear.

Click [

Save

] button.

The screenshot will be saved in the
specified path.

If you are using the IE8 as the default web
browser, select “

Tools-Internet Options-

Security

” and uncheck “

Use protected

mode

”.



Summary of Contents for SND-7080













































































































Search results

Summary of Contents for SND-7080

Reviews:

Related manuals for SND-7080

Brands by name

Popular brands

Samsung SND-7080, User Manual

Search results

Summary of Contents for SND-7080

Reviews:

Related manuals for SND-7080

Brands by name

Popular brands