background image

English 

_5

  

OVERVIEW

Class   construction

An apparatus with CLASS   construction shall be connected to a MAINS 
socket outlet with a protective earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive 
heat such as sunshine, fire or the like. 

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected. And please call 
a repair man in your location.

When used outside of the U.S., it may be used HAR code with fittings of 
an approved agency is employed.

CAUTION

These servicing instructions are for use by qualified service personnel only. 
To reduce the risk of electric shock do not perform any servicing other than 
that contained in the operating instructions unless you are qualified to do so. 

The BNC Out terminal of the product is provided for easier installation, and is 
not recommended for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage 
or malfunction to the product.

Please use the input power with just one camera and other devices must not 
be connected.   

Summary of Contents for SND-7080













































































































Reviews: