English
_31
●
NETWORK CONNECTION AND SETUP
Click [
OK
].
Manual network setup will be completed.
If the Broadband Router has more than one camera connected
Configure the IP related settings and the Port related settings distinctly with each other.
Category
Camera #1
Camera #2
IP related settings
IP Address
Subnet Mask
Gateway
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.101
255.255.255.0
192.168.1.1
Port related settings
HTTP Port
VNP Port
8080
4520
8081
4521
If the <
HTTP Port
> is set other than 80, you must provide the <
Port
> number in the address bar
of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port
http://192.168.1.100:8080
Auto Network Setup
Run <
IP Installer_vX.XX.exe
> to display the camera search list.
At the initial startup, both [
Auto Set
] and [
Manual Set
] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address
labeled on the rear of the camera.
Both the [
Auto Set
] and [
Manual Set
]
buttons will be activated.
Click [
Auto Set
].
The Auto Setting dialog appears.
The <
IP Address
>, <
Subnet Mask
>,
and <
Gateway
> will be set automatically.
6.
M
M
1.
2.
