Samsung SNB-3002 User Manual Download

Page: 60 / 116

setup screen

networK Setup

interface

From the Setup menu, select the

network ( )

> tab.

Click <

interface

Set the <

interface

•

IP type : Select an IP connection type.

- Manual : Specify the IP address,

Subnet mask, Gateway, DNS1,

and DNS2.

- DHCP : Specify the DNS1 and

DNS2.

- PPPoE : Specify the DNS1, DNS2,

ID and Password.

If you set it to <

Manual

>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.

•

MAC address : Shows the MAC address.

•

IP address : Displays the current IP address.

•

Subnet mask : Displays the <

Subnet mask

> for the set IP.

•

Gateway : Displays the <

Gateway

> for the set IP.

•

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

Set the <

ipv6 setup

Set to <

Use

> to use IPv6 address.

•

Default : Use the default IPv6 address.

•

DHCP : Display and use the IPv6 address obtained from the DHCP server.

•

Manual : Enter IP address and gateway manually and use it.

When done, click [

apply (

)

The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous

settings will be restored automatically.

Once completed with editing, click [

Apply

(

)

] to apply changes and the browser exits.

After a while, connect again with the changed IP.

60_

setup screen

Summary of Contents for SNB-3002





















































































































Search results

Summary of Contents for SNB-3002

Reviews:

Related manuals for SNB-3002

Brands by name

Popular brands

Samsung SNB-3002, User Manual

Search results

Summary of Contents for SNB-3002

Reviews:

Related manuals for SNB-3002

Brands by name

Popular brands