manualshive.com logo in svg

Samsung SNB-3002, User Manual

Share
Download
Samsung SNB-3002 User Manual Download Page 51

what is Gov length?

GOV(Group of Video object planes) is a set of video frames for MPEG-4 and H.264 

compression, indicating a collection of frames from the initial I-Frame (key frame) to the next 

I-Frame. GOV consists of 2 kinds of frames: I-Frame and P-Frame.
I-Frame is the basic frame for the compression, also known as Key Frame, which contains 

one complete image data. P-Frame contains only the data that has changed from the 

preceding I-Frame.
You can specify a value between 1 and 150 for the MPEG-4 and H.264 CODEC.

video setup

1. 

From the Setup menu, select the 

<

video & audio (   )

> tab.

2. 

Click <

video setup

>.

3. 

Select a <

video source

> mode.

 

•

Flip mode : Turn upside down 

the image that is captured by the 

camera.

 

•

Mirror mode : Flip horizontal the 

image that is captured by the 

camera.

4. 

Specify the privacy zone.

5. 

When done, click [

apply ( 

 )

].

English 

_51

●

  

Setup 

Screen

Summary of Contents for SNB-3002





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands