Samsung SNB-3002 Page 9 User Manual Download

Page: 9 / 116

English

●

over

view

proDuct featureS

multi-Streaming

This network camera can display videos in different resolutions and qualities

simultaneously using different CODECs.

web Browser-based monitoring

Using the Internet web browser to display the image in a local network environment.

alarm

If an event occurs, the event-related video will be transferred to the FTP/email specified

by the user or saved to the SD memory, or the event signal will be sent to the Alarm Out

port.

tampering Detection

Detects tempering attempts on video monitoring.

motion Detection

Detects motion from the camera’s video input.

auto Detection of Disconnected network

Detects network disconnection before triggering an alarm.

onvif compliance

This product supports ONVIF.

For more information, refer to www.onvif.org.

Summary of Contents for SNB-3002





















































































































Search results

Summary of Contents for SNB-3002

Reviews:

Related manuals for SNB-3002

Brands by name

Popular brands

Samsung SNB-3002, User Manual

Search results

Summary of Contents for SNB-3002

Reviews:

Related manuals for SNB-3002

Brands by name

Popular brands