Samsung SL-M2625D, User Manual

Page: 106 / 232

Wired network setup
106
2. Using a network-connected machine
From the SyncThru™ Web Service
Activating IPv6
1 Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click
Go .
2
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
• ID: admin
• Password: sec00000
3
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings .
4
Click TCP/IPv6 on the left pane of the website.
5
Check the IPv6 Protocol check box to activate IPv6.
6 Click the Apply button.
7 Turn the machine off and turn it on again.
• You can also set the DHCPv6.
• To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::
AAAA . “A” is the hexadecimal 0 through 9, A
through F).
IPv6 address configuration
1 Start a web browser, such as Internet Explorer, that supports IPv6
addressing as a URL.
2 Select one of the IPv6 addresses ( Link-local Address , Stateless
Address , Stateful Address , Manual Address ) from Network
Configuration Report (see "Printing a network configuration report" on
page 102).
• Link-local Address : Self-configured local IPv6 address (Address
starts with FE80).
• Stateless Address : Automatically configured IPv6 address by a
network router.
• Stateful Address : IPv6 address configured by a DHCPv6 server.
• Manual Address : Manually configured IPv6 address by a user.
3 Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.