Samsung SHR-2080 User Manual Download Page 73

Page: 73 / 211

English

5-16

PTZ Device

●

It is an ID for PTZ Camera and available to set from 0 to 255.

●

Protocol

It is supported by the PTZ device.

The following protocols are now being supported.

Samsung / Vic. / Pan. / AD / Phi. / Ern. / Pel-D / Pel-P / Vcl. / Dia. / Kal. / Tech.

●

Baurate

Baurate is supported by the PTZ device. 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400

●

Parity

It is set to the one of None, Even, and Odd.

●

Data

It is set to either 7 or 8.

●

Stop

It is set to either 1 or 2.

●

Duplex

It is set to either Half Duplex or Full Duplex.

●

In the case of the 2080/2082, 8-channel information comes up.

Caution

The above items shall be same to the PTZ device setup.
For the details, please refer to User Manual of the PTZ device manufacturer.

SHR-2160/2162/2080/2082-E-1 10/19/07 9:36 AM Page 5-16

Summary of Contents for SHR-2080




















































































































































































































Search results

Summary of Contents for SHR-2080

Reviews:

Related manuals for SHR-2080

Brands by name

Popular brands

Samsung SHR-2080, User Manual

Search results

Summary of Contents for SHR-2080

Reviews:

Related manuals for SHR-2080

Brands by name

Popular brands