Samsung SHR-2080 User Manual Download

Page: 147 / 211

English

9-28

●

Sequence Time

- When connecting with SHR-2160/2162/2080/2082 in the monitoring mode, set

the auto sequence time if the auto sequence is set. The time can be set from 10

to 20 minutes.

●

OSD Display

- Sets if OSD shall be displayed on each channel of Smart Viewer.

- Whether you check “Enable” or not, OSD will appear or not.

However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not

be affected by the OSD condition.

●

Callback Connection

- Sets the port for Callback connection.

●

Auto Connection

- Sets if the smart viewer is automatically connected to

SHR-2160/2162/2080/2082 or site at the initial operation.

- If you check “Auto Connection Enable”, the names of SHR-2160/2162/2080/2082

and Site currently registered at the DVR/Site list will be displayed in the following

list. If you select one from the list, the smart viewer will connect to the selected

SHR-2160/2162/2080/2082 or Site when it operates later.

●

Language

- Sets the language used in the SmartViewer.

SHR-2160/2162/2080/2082-E-3 10/18/07 4:49 PM Page 9-28

Summary of Contents for SHR-2080




















































































































































































































Search results

Summary of Contents for SHR-2080

Reviews:

Related manuals for SHR-2080

Brands by name

Popular brands

Samsung SHR-2080, User Manual

Search results

Summary of Contents for SHR-2080

Reviews:

Related manuals for SHR-2080

Brands by name

Popular brands