Samsung SHR-2080 User Manual Download Page 26

Page: 26 / 211

SHR-2160/2162/2080/2082 USER’S MANUAL

2-9

English

8. Check if there is any problem with connector or wiring inside of the product for connecting

and mounting then close the cover.

9. Tighten cover mounting screws. (The left and right side each has 5 spots and back side has

1 spot)

7. Make sure that the bracket-HDD is mounted stably inside of the product, then connect the

power supply cable, signal transmission cable (IDE cable), and fan cable to the HDD.

Caution

1. When mounting an additional HDD, the primary master has to be mounted.

When adding one – Primary slave (mount on the top of the bracket that has a built-in HDD

when coming out of the factory.)

When adding two – Secondary master (mount under the bracket that is empty when coming

out of the factory.)

When adding three – Secondary Slave (mount on the top of the bracket that is empty when

coming out of the factory.)

2. Mount the HDD you want to add after setting the master/slave jumpers in the proper order.

SHR-2160/2162/2080/2082-E-0 10/18/07 3:55 PM Page 2-9

Summary of Contents for SHR-2080




















































































































































































































Search results

Summary of Contents for SHR-2080

Reviews:

Related manuals for SHR-2080

Brands by name

Popular brands

Samsung SHR-2080, User Manual

Search results

Summary of Contents for SHR-2080

Reviews:

Related manuals for SHR-2080

Brands by name

Popular brands