Samsung SHN-WDS700, User Manual

Page: 15 / 36

1 1
Smart
Door Lock
SHN-WDS700
Random Security Function :
This mode prevents the disclosure of the PIN Code by enter-
ing the PIN Code after authenticating 2 arbitrarily selected numbers. When the buttons for 2
arbitrarily selected numbers are illuminated, pressing the 2 illuminated buttons illuminates the
whole touchscreen. You can enable or disable the Random Security function. This function is
enabled by default.
Registration Button :
This button is used to change Master PIN Code/User PIN Codes/User
Cards or the lock settings. It is found below the battery cover of the Interior Unit. The length of
time the [Registration] button is pressed varies depending on the function.
Resetting :
Deletes all registered information and restores the factory default. After resetting,
change the Master PIN Code for security.
Restart Button :
This button resets the lock when the lock stops functioning. Registered infor-
mation is not deleted.
Sound Setting :
The volume during the input of numbers and opening or locking of the door
can be set from Level 0 ~ Level 3. The sound is muted at Level 0 and is at maximum volume at
Level 3. The registration mode operates at Level 2 regardless of the sound setting.
User Card :
You can register up to 70 User Cards including the User PIN Codes. You can open
the door with a User Card.
User/Management Number :
It is the same number as the registered user’s address and can
be set from 1 to 70. The User Number should be managed with caution as it is used to register
or delete User PIN Codes/Cards.
User PIN Code :
You can register up to 70 User PIN Codes (4-12 digits) including the User
Cards. You can open the door with a User PIN Code.
Function Factory Default
Master PIN Code 1234
Volume Level 2
User PIN Code/Card None
Locking Mode Auto
Out-of-home Security
Function
Disabled
Double-locking Disabled
Random Security Enabled
Double Authentication
Mode
Disabled
Settings Master User
Opening the Door
 
Setting Up the Sound
 
Changing Master PIN Code

Registering User PIN Code/Card

Deletion of User PIN Code/Card

Setting the Locking Mode
 
Setting Out-of-home Security
 
Setting Double-locking
 
Setting Random Security
 
Factory Reset

Setting the Volume
 
Setting the Double Authenti-
cation Mode
 
Scope of Master, User Settings
Factory Default