SAMSUNG Proprietary-Contents may change without notice
Exploded view and its Part list
3-7
This Document can not be used without Samsung's authorization
3-4. Assembling Procedure
Check the guide holes for
dome sheet
The lower part of dome sheet should
be attached on the rear side of PCB
Solder the sub_microphone guided by
it's soldering point
Adhere the non-conductive tape on
the soldering point of SUB_MIC
.
Check the guide hole on right
position
Check the Hot Bar, Backlight FPCB,
Heat seal and Guide poles
Soldering
Point
1
2
3
4
5
6