SAMSUNG Proprietary-Contents may change without notice
Exploded view and its Part list
3-10
This Document can not be used without Samsung's authorization
Solder the side key FPCB. Adjust the
PCB outline and be careful of
electrical shortage.
Insert the rubber for intenna contact
Rubber should be place on aligned
position on the red line
Adhere the non-conductive tape on
the solder point of side key
Bend the SPK FPCB
The bending point of SPK FPCB
Lower side
Push lightly
Higher side
This point
should not be
bended
Bending point
of FPCB (the
form of 'U')
24
23
21
22
20
19