SAMSUNG Proprietary-Contents may change without notice
Exploded view and its Part list
3-15
This Document can not be used without Samsung's authorization
Adhere the non-conductive tape on
the Main connector of Main PCB
Adhere the gold gasket over the non-
conductive tape
Bending line should be aligned with
the red line
If the other point is bent, the critical
display error will be occurred
Bend and push the side key FPCB
into the front case
Put the Main PCB on the shield can
in the order described above
①
①
②
②
③
③
51
50
48
49
47
46