SAMSUNG Proprietary-Contents may change without notice
Exploded view and its Part list
3-21
This Document can not be used without Samsung's authorization
3-6. LCD KIT Assembling Procedure
Check the (1)Hot Bar, (3) Backlight
FPCB, (2) Heat seal and (4)Guide
poles
1. Remove the double-sided tape on
Sub PCB by tweezer.
2. Align the guide holes on hot bar
FPCB with guide silk on Sub PCB.
3. Paste the flux evenly on the
solder PAD .
4. Solder by the soldering iron
5. Check the soldered condition
Check the condition of HOT BAR by a magnifying glass
1
3
4
3
2
1
NG
FILLET should be formed
OK
2