SAMSUNG Proprietary-Contents may change without notice
Exploded view and its Part list
3-23
This Document can not be used without Samsung's authorization
1. Solder the Receiver
(Temp. recommend :
350℃ ~ 380℃)
2. Soldering time : within 3 sec.
1. Check the soldered position
2. Check the short/open condition
Adhere the non-conductive tape on
left side of PCB
Adhere the non-conductive tape on
the charger pump
Adhere the non-conductive tape on
Hot-bar
Adhere the non-conductive tape on
backlight FPCB
Check the Guide hole
NG
OK
8
9
12
13
11
10