Samsung SF-360 Series User Manual Download Page 67 | Manualshive

Page: 67 / 84

background image

8.10

Print quality problems

Paper feeding problems

Problem

Solution

Light or blurred characters.

Check Ink Level View as described in "Ink level view" on page 8.4. If the
printer cartridge has completely run out,

Ink Low. Install new ink cartridge

is dis-

played. To install a new print cartridge, see "Replacing the print cartridge"
on page 8.3. Make sure the print cartridge is installed correctly. To clean
the print cartridge, see "Cleaning the cartridge" on page 8.5.

Smudged or dark characters.

Make sure the paper is straight and unwrinkled. Let ink dry before
handling the paper. To clean the print cartridge, see "Cleaning the car-
tridge" on page 8.5.

Characters with white lines.

If

Ink Low. Install new ink cartridge

is displayed, install a new print cartridge as

described in "Replacing the print cartridge" on page 8.3. Remove and rein-
stall the print cartridge. Clean the print cartridge (see "Cleaning the car-
tridge" on page 8.5.)

Improperly formed or misaligned
characters.

Clean the print cartridge (see "Cleaning the cartridge" on page 8.5.)

Abnormal black horizontal lines

Clean the cartridge carrier (see "Cleaning the cartridge carrier contacts" on
page 8.6.)

Problem

Solution

Paper is jammed during
printing.

Clear paper jam as described in "Paper jams during printing" on page 8.11.

Paper sticks together.

You can load up to 50 sheets in the ASF (Automatic Sheet Feeder).
Check if you overloaded. Humid conditions may cause some paper to stick together.

Paper fails to feed.

Remove any obstructions inside the printer.

Multiple sheets of paper
feed.

When loading paper, do not force the paper down into the printer. If multiple sheets have
caused a paper jam, clear the paper jam. (see "Paper jams during printing" on page 8.11.)

Paper skews or buckles in
the automatic sheet
feeder.

ASF can hold up to 50 sheets. Make sure the paper guides do not cause the paper to bow in
the bin. When loading paper, do not force it down into the printer.

«
...
65
66
67
68
69
...
»

Summary of Contents for SF-360 Series





















































































Reviews:

No comments

Related manuals for SF-360 Series

Brand: Janome Pages: 63

Brand: Janome Pages: 8

Brand: Bernette Pages: 72

BP27 ULTRA MAXX

Brand: NSS Pages: 20

AMS-210E Series

Brand: JUKI Pages: 243

Brand: GBC Pages: 25

Brand: JUKI Pages: 59

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 15

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 15

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands