Samsung SF-360 Series User Manual Download Page 37

Page: 37 / 84

5.6

Received fax remote notifcation (SF-365TP only)

While you are away from your home or office, you can know if there is a new fax or not. Your machine can send

a voice message with a recorded number you select when the new fax comes in.

Press

Menu

repeatedly, and press

when

ADVANCED FAX

appears.

Select

Set Fax Notice

by pressing

Scroll

buttons, and press

The display shows

Off

whenever you press

Scroll

buttons.

• Off: disables auto fax notice
• On: dials the number and leaves the voice message to notify the new fax

Press

after selecting

Enter the telephone number and press

If you have ever recorded a Fax auto notice OGM before, the machine asks if you want to change.

If there is no recorded OGM, the machine asks to record OGM.

To change or record the OGM press

, and speak into the microphone.

Or, press

Stop/Clear

to keep as it is.

Summary of Contents for SF-360 Series





















































































Search results

Summary of Contents for SF-360 Series

Reviews:

Related manuals for SF-360 Series

Brands by name

Popular brands

Samsung SF-360 Series, User Manual

Search results

Summary of Contents for SF-360 Series

Reviews:

Related manuals for SF-360 Series

Brands by name

Popular brands