Samsung SF-330 Series, User Manual

Page: 48 / 64

7.8
Memory Received
When it toggles with:
Ink Low. Install new
ink cartridge
Load paper and press
Start/Enter
Install ink cartridge
The machine has data stored in memory. Depending on the
message do as follows:
Replace the print cartridge with new one.
Load the paper, and press
Start/Enter
. There might be a jam.
Clear the jam as described in "Paper jams during printing" on
page 7.11.
Install a print cartridge.
Fax
No answer from remote
fax
The other machine has not answered after all your attempts to
send a fax. Fax
No CID Number The machine could not detect the CID (Caller ID) number. Telephone
No Dial Number
There is no number in the redial memory, which is successfully
dialled up to now. Telephone
No Message There is no message to play or erase. TAM (SF-335T only)
No New Message
There is no new caller message. TAM (SF-335T only)
Not Found The number you are searching does not exist in memory. Telephone
Number already
registered
The number you are trying to register already exists in the
phonebook or junk fax list. Telephone
Number Not Assigned There is no number assigned to the One-Touch or two-digit
Speed number. Telephone
Poll Code Error
The remote user entered wrong poll code. Fax
Poll job exists
already You have programmed a polling send. Cancel scheduled job
and try again. Fax
Polling Error
Check remote site
The machine you want to poll is not ready to answer your poll.
The person you are polling should have loaded their fax
machine with a document and be in send poll state. Fax
Record TAM OGM To select TAM receive mode, you should record OGM prior to
pressing the
Answer
button.
TAM (SF-335T only)
Remove jammed
document
The document you are sending has jammed in the feeder. To
clear the document jam, see "Document jams during transmis-
sion" on page 7.11.
You tried to copy or fax a document which is longer than
390mm. Document
System Busy
Try again later There is no available resource to execute job you ordered. Fax
To redial now, press
Start/Enter
The machine is waiting to automatically redial the fax number
that was busy or did not answer. Fax
Display Status/Solution Related to: