Samsung SF-330 Series, User Manual

Page: 47 / 64

C
ARE
AND
M
AINTENANC
E
7.7
C
ARE
AND
M
AINTENANCE
C
ARE
AND
M
AINTENANCE
C
ARE
AND
M
AINTENANCE
C
ARE
AND
M
AINTENANCE
C
ARE
AND
M
AINTENANCE
C
ARE
AND
M
AINTENANCE
C
ARE
AND
M
AINTENANCE
LCD error messages
Display Status/Solution Related to:
Adjust scanner first
in Maintenance menu
The shading waveform to be used as a reference is corrupted
due to unknown reason. Adjust the scanner to fix this problem
as described in "Shading adjustment" on page 7.4. Scanner
Check white paper
document and try
again The scanning level is too low to compare with reference level.
To adjust shading, you should use the plain and white paper. Scanner
Clean white roller,
glass and try again
The scanning level is slightly low, which can affect the image
quality. To clean concerned parts, see "Cleaning the document
scanner" on page 7.2. Scanner
Duplicated with
[Speed No.xx]
The xx indicates the location
number.
The same number has already been registered into another
speed dial location. Telephone
Exceeded Job Memory
Cancel scheduled job
and try again The broadcasting and delayed fax can hold 5 jobs in total.
Cancel scheduled job and try again. Fax
Exceeded Total
Message Memory
The machine can hold up to 100 messages (OGM + ICM +
recorded conversations).
Erase old messages to make a room in the memory. TAM (SF-335T only)
ICM Memory Full The voice memory is full. No more caller’s messages can be
recorded (Total recording time is about 15 minutes).
TAM (SF-335T only)
Ink Low. Install new
ink cartridge
The print cartridge has run out of ink. To install a new Print
Cartridge, see "Replacing the print cartridge" on page 7.3.
Although this message is displayed, you can make a copy or
print a report. But, stored data in memory can be printed by
changing the cartridge.
Cartridge
Install ink cartridge Print cartridge is not installed or improperly installed. Cartridge
Install mono ink
cartridge
The mono print cartridge should be installed to copy, print a
report or receive a fax. Cartridge (SF-331P
only)
Job Not Assigned You attempted to cancel the scheduled job but there is no jobs
scheduled. Fax
Junk Fax Empty
You attempted to delete the junk fax number when there is no
junk fax number. Fax
Junk Fax Full The machine can hold 20 junk fax numbers but you tried to add
more. Fax
Load Document
You have tried to send a fax and there is no document loaded
into the machine. Document
Memory Full Memory has become full while receiving a fax. Fax
Memory Full
Press Start/Enter to
continue
Memory has become full while scanning a document. Press
Start/Enter
to send or copy the scanned pages only. To cancel
the job press
Stop/Cancel
and try again when memory
becomes available, or split the new document into smaller
parts.
Fax/Copy