Samsung SF-3000I Operator'S Manual Download

Page: 46 / 110

ACHINE

HAPTER

OUR :

ACHINE

Loading Document

Turn the page face down.

Adjust the document
guides to match the
width of the document.

Be sure that your document is dry

and free of staples, paper clips, and
other foreign objects.

You can insert up to 15 sheets at a

time. If you insert more than one sheet,
make sure the bottom sheet enters first.
Stagger the leading edge of the sheets
slightly, and insert the sheets with a
slight push to ensure smooth feeding.

To add pages while the fax is sending,
insert them into the loading slot on top
of the already loaded sheets.

If youÕre loading pages that are
unusually thick or thin, feed one sheet
at a time.

If the document doesnÕt feed correctly,
open the control panel, remove the
document, and try loading it again.

Each time you press

Resolution

FINE, SUPER FINE, PHOTO, or
STANDARD are displayed in sequence.

The selected mode flashes. The

contrast is preset to AUTO.

For a normal document, it is not
necessary to change the contrast. Skip
over this step.

If needed, choose the
proper contrast for the
document by using

Rcv.
Mode

Redial/
Pause

Volume/Scroll

If needed, choose the
resolution for the
document by pressing

Resolution

until you find

the desired mode.

Speed

Resolution

Flash

Rcv.
Mode

Redial/
Pause

Slide the sheet down into
the document tray until
itÕs gripped by the
machine.

The automatic document
feeder seizes and pulls in
the page.

The display asks you to
choose the contrast for
the document.

LIGHT AUTO DARK

0-Chapter 4(GODREJ) 9/20/98 5:14 PM Page 4

Summary of Contents for SF-3000I















































































































Search results

Summary of Contents for SF-3000I

Reviews:

Related manuals for SF-3000I

Brands by name

Popular brands

Samsung SF-3000I, Operator'S Manual

Search results

Summary of Contents for SF-3000I

Reviews:

Related manuals for SF-3000I

Brands by name

Popular brands