Samsung SF-3000I Page 101 Operator'S Manual Download

Page: 101 / 110

.12

HAPTER

IGHT :

ARE AND

AINTENANCE

ARE AND

AINTENANCE

Display

Meaning

NO. NOT ASSIGNED

There is no number assigned for the One-Touch button
or 2-digit Speed number you chose.

PAPER EMPTY

Printer is out of paper. If paper runs out while printing a
fax, the machine restarts fax printing when paper is
loaded

NO CARTRIDGE

Print Cartridge is not installed properly or no cartridge
is installed in the machine.

PLEASE HOOK-ON

The handset is not in its cradle. Place the handset in its
cradle.

POLLING ERROR

TOO MUCH PAGES

RECEIVE ERROR

SEND ERROR

The machine you want to poll is not ready to answer
your poll. The person you are polling should have
loaded their fax machine with a document.

This message also appears when you poll another fax
machine with an incorrect Poll Code.

You have tried to store more than 99 pages. One memory
job can store up to 99 pages.

A fax has not been received successfully. Ask the sender
to try again.

Your fax has not gone through successfully. Try again.

PAPER JAM

Recording paper is jammed during printing. Clear the
paper jam, and press the

Stop

button.

0-Chapter 8(GODREJ) 9/20/98 5:17 PM Page 13

Summary of Contents for SF-3000I















































































































Search results

Summary of Contents for SF-3000I

Reviews:

Related manuals for SF-3000I

Brands by name

Popular brands

Samsung SF-3000I, Operator'S Manual

Search results

Summary of Contents for SF-3000I

Reviews:

Related manuals for SF-3000I

Brands by name

Popular brands