Media and tray
_ 50
•
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the
machine.
•
Do not use labels that are separating from the backing sheet or are
wrinkled, bubbled, or otherwise damaged.
Card stock/Custom-sized paper
Postcards, cards and other custom-sized materials can be printed with this
machine.
•
Do not print on media smaller than 76 mm (3.00 inches) wide or 127 mm
(5.00 inches) long.
•
In the software application, set margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
•
If media weight is over 160 g/m
2
(43 lb), try printing in the rear cover
(face up).
Letterhead/ Preprinted paper
•
Letterhead/ Preprinted paper must be printed with heat-resistant ink that
will not melt, vaporize, or release hazardous emissions when subjected
to the machine’s fusing temperature for 0.1 second. Check your
machine’s specification to view the fusing temperature about 170°C(338
°F).
•
Letterhead/ Preprinted paper ink must be non-flammable and should not
adversely affect machine rollers.
•
Forms and letterhead should be sealed in a moisture-proof wrapping to
prevent changes during storage.
•
Before you load letterhead/preprinted paper, verify that the ink on the
paper is dry. During the fusing process, wet ink can come off preprinted
paper, reducing print quality.
Photo
•
Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
Glossy
Load one paper to the manual tray at a time, glossy side facing up.
•
Recommended media: Glossy paper (Letter) for this machine by
HP
Brochure Paper
(Product: Q6611A) only.
•
Recommended media: Glossy paper (A4) for this machine by
HP
Superior Paper 160 glossy
(Product: Q6616A).
SETTING THE PAPER SIZE AND TYPE
After loading paper in the paper tray, set the paper size and type using the
control panel. These settings will apply to copy and fax modes. For
computer printing, select the paper size and type in the application program
you use on your computer (See "Opening printing preferences" on
page 53).
The settings made from the machine driver override the settings on
the control panel.
Setting the paper size
1.
Press
Menu
on the control panel.
2.
Press the left/right arrow until
System Setup
appears and press
OK
.
3.
Press the left/right arrow until
Paper Setup
appears and press
OK
.
4.
Press the left/right arrow until
Paper Size
appears and press
OK
.
5.
Press the left/right arrow to select the paper tray you want and press
OK
.
6.
Press the left/right arrow to select the paper size you want.
7.
Press
OK
to save the selection.
8.
Press
Stop/Clear
to return to ready mode.
If you want to use special-sized paper-such as a billing paper, select
Edit...
in the
Paper
tab in the
Printing Preferences
(See "Opening
printing preferences" on page 53).
Setting the paper type
1.
Press
Menu
on the control panel.
2.
Press the left/right arrow until
System Setup
appears and press
OK
.
3.
Press the left/right arrow until
Paper Setup
appears and press
OK
.
4.
Press the left/right arrow until
Paper Type
appears and press
OK
.
5.
Press the left/right arrow to select the paper tray you want and press
OK
.
6.
Press the left/right arrow to select the paper type you want.
7.
Press
OK
to save the selection.
8.
Press
Stop/Clear
to return to ready mode.
Setting the paper source
1.
Press
Menu
on the control panel.
2.
Press the left/right arrow until
System Setup
appears and press
OK
.
3.
Press the left/right arrow until
Paper Setup
appears and press
OK
.
4.
Press the left/right arrow until
Paper Source
appears and press
OK
.
5.
Press the left/right arrow until
Copy Tray
or
Fax Tray
appears and
press
OK
.
6.
Press the left/right arrow to select the paper tray you want.
7.
Press
OK
to save the selection.
SINGLE-SIDED
DOUBLE-SIDED
Tray1
Face down
Face up
Manual tray
Face up
Face down
Downloaded From ManualsPrinter.com Manuals
