Network setup
_ 38
3.
Select
Install Now
.
If necessary, select a language from the drop-down list.
The
Advanced Installation
has two options,
Custom Installation
and
Install Software Only
. The Custom Installation allows you to
select the machine’s connection and choose individual component
to install. The Install Software Only allows you to install the
supplied software, such as Smart Panel. Follow the instruction on
the window.
4.
Read
License Agreement
, and select
I accept the terms of the
License Agreement
. Then, click
Next
.
The program searches the machine.
If your machine is not found in the network or locally, the error
message appears.
•
Check if you want to install the software without
connecting the printer to the network or locally.
-
Check this option to install this program without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.
•
Search again
When you press this button, the firewall notice window
appears;
-
Turn off the firewall and
Search again
. For Windows
operating system, click
Start
>
Control Panel
>
Windows
Firewall
, and inactivate this option.
-
Turn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
•
Direct Input
The
Direct Input
allows you to search a specific machine on
the network.
-
Search by IP address
: Enter the IP address or the host
name. Then click
Next
.
To verify your machine’s IP address, print a network
configuration report (See "Printing Network Configuration
report" on page 35).
-
Search by network path: To find a shared machine (UNC
Path), enter the shared name manually or find a shared
printer by clicking the
Browse
button. Then click
Next
.
•
Help
If your machine is not connected to the computer or network,
This help button gives detailed information about the how to
connect the machine.
•
Set IP Address
If you want to set a specific IP address on a specific network
machine, click the
Set IP Address
button. The
Set IP Address
window appears. Do as follows:
a) Select a machine to be set with a specific IP address from
the list.
b) Configure an IP address, subnet mask, and gateway for the
machine manually and click
Apply
to set the specific IP
address for the network machine.
c) Click
Next
.
5.
The searched machine will be shown on the screen. Select one you wish
to use.
If the driver searched only one printer, the confirmation window
appears.
The program starts installation.
6.
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click
Print a test page
.
Otherwise, just click
Next
and skip to step 8.
7.
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
8.
To register as a user of the machine in order to receive information from
Samsung, click
On-line Registration
.
9.
Click
Finish
.
•
After the driver setup, you may enable firewalls.
•
If your printer driver doesn’t work properly after setup has been
completed, repair or reinstall the printer driver (See "Installing
wired network or USB connected machine’s driver" on page 37).
Macintosh
1.
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2.
Insert the supplied software CD into your CD-ROM drive.
3.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
4.
Double-click the
MAC_Installer
folder.
5.
Double-click the
Installer OS X
icon.
6.
Enter the password and click
OK
.
7.
The Samsung Installer window opens. Click
Continue
.
8.
Read the license agreement and click
Continue
.
9.
Click
Agree
to agree to the license agreement.
10.
Select
Easy Install
and click
Install
.
Easy Install
is recommended for
most users. All components necessary for machine operations will be
installed.
If you select
Custom Install
, you can choose individual components to
install.
11.
The message which warns that all applications will close on your
computer appears. Click
Continue
.
•
If a window asking you to select an installation type appears,
select
Typical installation for a network printer
and then
click
OK
.
•
If you select
Typical installation for a network printer
, the
SetIP program automatically runs. If the machine has already
configured network information, close the SetIP program. Go to
the next step.
12.
After the installation is finished, click
Quit
.
13.
Open the
Applications
folder >
Utilities
>
Print Setup Utility
.
•
For Mac OS X 10.5 ~ 10.6, open the
Applications
folder >
System
Preferences
and click
Print & Fax
.
Downloaded From ManualsPrinter.com Manuals
