26
5.
This product should be operated using the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
6.
Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
7.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
8.
Never spill liquid of any kind into or onto the product.
9.
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
10.
Refer all questions regarding servicing of this product to qualified service personnel.
Danger—Electric Shock and Fire
Electric current from power, telephone, and communication cables is hazardous, and could result in electric shock and/or fire.
To avoid electric shock, use caution when connecting cables. For example, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV
circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors.
To avoid electric shock, do not operate the product or connect or disconnect cables during electrical storms. To avoid electric shock, do not use this product in or near water.
To reduce the risk of fire or overheating, keep this product in well ventilated areas, away from radiators or other heat sources. Do not block cooling vents.
The plug-socket combination must be accessible at all times because it serves as the main power-disconnecting device.
Use only the manufacturer-provided AC adaptor approved for use with this product. Use of another AC adaptor may cause a fire or explosion.
This product relies on short-circuit (over current) protection installed in your home or office. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. is used on the phase conductors (all
current carrying conductors).
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that
are covered by the operating instructions, since improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to normal condition.
Caution—Electromagnetic Interference
This product generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the manufacturer’s instruction manual, may cause interference with radio and
television reception. This product has been tested and found to comply with the limits set forth in Part 15 of the Federal Communications Commission Rules.
Owner’s Record
The model name, model number, regulatory number, and FCC ID are located on a label affixed to the bottom of the unit. The MSN and MAC ID are on a sticker affixed on the side of the unit. Record the MSN
and the MAC ID in the space provided below. This will be helpful if you need to contact us about your Network Extender for Business in the future.
Model: Verizon Wireless Network Extender for Business
MSN:
MAC ID:
