Samsung SCO-2370N, User Manual

Page: 34 / 56

34_ setup
setup
DIS : The DIS mode can compensate for
vibration of the camera.
When DIS is operating, D-ZOOM does not
operate.
SYNC : Two synchronization modes are available INTERNAL and EXTERNAL
LINE-LOCK.
In LINE-LOCK mode, it synchronizes the camera’s video out signal to the
external SYNC signal.
INT : Internal synchronization
LL : External line-lock synchronization
➊
If you choose ‘LL’, you can adjust the desired phase.
Press the Function Setup switch.
➋
You can adjust the desired phase from 0 to 359.
COMM ADJ (Communication Adjustment) :
This function sets up the camera
communication status when controlling the
camera through an external controlled device.
➊
When the SPECIAL menu screen is
displayed, using the Function Setup
switch so that the arrow indicates
‘COMM ADJ’.
➋
Set up the mode moving the 4 direction
of the Function Setup switch.
PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/
PELCO-P/ BOSCH/HONEYWELL/VICON/AD/SAMSUNG-E/PANASONIC)
CAM ID : Determines the camera's identifi cation number (between 0 and 255).
BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
UART MODE : You can select NONE, EVEN or ODD for the parity bits.
y
M 
y
-
-
y
-
-
-
-
SPECIAL SETUP
PRIVACY OFF
DAY/NIGHT AUTO
䯝
DIS OFF
SYNC INT
COMM ADJ
IMAGE ADJ
MONITOR LCD
DISPLAY
RETURN
COMMUNICATION SETUP
䯝
PROTOCOL SAMSUNG-T
CAM ID
Â
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
1
BAUD RATE 9600
UART MODE 8-N-1
RET PKT DISABLE
RETURN