Samsung SCO-2370N, User Manual

Page: 12 / 56

introduction
12_ introduction
❶
Power input terminal : Connect the power as specified for each model here.
MD Output Terminal : Motion detection signals are output through this terminal.
RS-485 control terminal : You can control SETUP MENU through this port by using
external controllers like a Remote controller that RS-485
Communication is supported. For details, see page 16.
Video output termina l : Video signals are output through this port. Connect this port
to the Video IN port of a monitor.
➊
➋
➌
➍
Back
➋
➌
➍
Connector Signal Level I/O
MD
There is motion
USER Vcc
There is no motion
0V
5±0.5sec
← →
Output
MD(Motion Detection) Output format is open collector.
M
