Samsung SCO-2370N, User Manual

Page: 13 / 56

English_13
●
INTRODUCTION
COMPONENT NAMES AND FUNCTIONS
Heater & Fan
This product is equipped with built-in heater & fan, and capable of maintaining
appropriate internal temperature as well as defrosting and dehumidification.
Front cover
Heater
Fan
While powered, the heater operates according to the camera’s internal temperature.
(Note that the fan always operates if powered.)
While the camera is powered, the heater operates if its internal temperature drops below
0 °C. When the camera’s internal temperature reaches 10 °C, the heater stops operating.
Camera’s internal temperature is within -50°C ~ -10°C, the message “Low Temperature
Wait” appears on the black background. The camera initializes and outputs video signal
once it gets above -10°C.
Be careful not to touch the heater while installing if the ambient temperature is below than -10°C,
since the heater may operate immediately after applying the power.
If the front cover is cross threaded or not correctly tightened the camera housing will not be weatherproof.
When you combine the front cover, combine the triangle of front cover and triangle of main body
confront each other.
Frost can be found if the camera is left under -10°C and then powered, and the frost will be
removed automatically in about 3 hours.
The camera will be initialized if its internal temperature becomes 80°C or higher.
1.
y
y
M




