Samsung SCO-2370N, User Manual

Page: 16 / 56

installation & connection
16_ installation & connection
RS-485 COMMUNICATION CONTROL
Connecting to RS-485 Control Cable
Using RS-485 communication will enable you to control the OSD menu from a
SAMSUNG TECHWIN System Controller or DVR.
(1) Connection to a PC.
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
EX) SERIAL PORT OF THE PC(COM1)
p
SERIAL CABLE
p
RS-485 CONVERTER
p
RS-485 CONTROL CABLE
(2) Connection to a DVR or System Controller.
Connect the RS-485 cable to the connection ports of the DVR or System Controller.
485 Control Board Connection Port RS-485 Control Port
(+) CONNECTION TERMINAL WHITE (TRX+)
(-) CONNECTION TERMINAL BLUE (TRX-)
* RS-485 Communication establishment initial value
Item Camera ID BAUD RATE UART MODE RET PKT
Initial value 1 9600 8-NONE-1 DISABLE
When making a control system to control the camera, please use to the protocol(SAMSUNG-T,
SAMSUNG-E, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYELL, AD).
When you connecting to RS-485 CONTROL TERMINAL, please peel off the outer skin inside the
RS-485 CONTROL TERMINAL.
M


CONTROL CABLE SPEC
WHITE RS-485+
BLUE RS-485-