Samsung SCH-670 Owner'S Manual Download Page 7

Page: 7 / 49

Standby

mode

SLOT 0

SLOT 1

SLOT 2

15-25 hr

30-40 hr

50-70 hr

Talk mode

about 150 min

about 240 min

25-35 hr

40-55 hr

60-95 hr

Battery

Standard

(BTL1024)

Medium

(BTL1624)

Status

1. To turn on the phone, press

END/

and hold.

Result:

The phone

◆

Beeps

◆

Displays the greeting message, your
phone number, and current date and
time.

If the phone is locked, the
message

’LOCKED’

displayed. To unlock the phone,
enter the lock code. You can
place a 3-digit emergency call
when the phone is locked.

2. To turn off the phone, press

END/

until you hear a beep tone.

Turning the Phone On and Off

The phone can only place and receive calls when it
is turned on.

• If any button is pressed in the low

battery status, the LCD backlight
lamp is not turned on.

• If the battery is fully discharged, a

warning tone sounds three times
and the power is turned off.

The number of blocks represents the
battery charge level.

Example:

Battery fully charged
Battery low

When the battery drops to a low level,
the phone beeps and the battery icon
turns to .

Checking the Battery Charge Level

The battery charge level is displayed at the left
corner of the LCD display.

• The operating time varies according to the service mode you

are using.

• If you stay in no-service area for a long time, the operating

time may be shorten.

• The standby time is different according to the service type

provided from the supplier.

• The battery is a consumable product, so that the battery life

will be reduced. We guarantee the battery for 6 months.
When the battery life is reduced by half, purchase new
battery.

◆

When fully charged, the new battery will last as follows:

SCH-670 (1-19) 11/23/98 3:17 PM Page 12

Summary of Contents for SCH-670


















































Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands

Samsung SCH-670, Owner'S Manual

Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands