Samsung SCH-670 Owner'S Manual Download Page 28

Page: 28 / 49

1. Press:

◆

FCN

followed by

◆

Numeric buttons

and

2. Press

until you find the

desired alert type.

Result:

There are three receiving aler t

modes (

O F F

O N C E

EVERY 2

M I N

) available.

3. Press

STO

1. Press:

◆

FCN

followed by

◆

Numeric buttons

and

2. Press numeric button

to choose

‘

Set

’.

3. Press

to choose the alarm

mode.

Result:

Each time you press

or ,

’ONE TIME’

’ D A I L Y ’

alternatively displayed.

◆

ONE TIME

: Alarm will be

activated one time.

◆

D A I L Y

: Alarm will be activated

on a specified time every day
unless you release the alarm
feature.

4. Press

STO

Result:

If any alarm time is already set,

the message

’ALARM TIME’

and

the appointed time are displayed.

5. Enter the time you want to set.

Result:

◆

If the current time is already set,
you can specify the alarm time.
Enter the hour and minute.

◆

If the current time is not set, enter
the time duration your phone has to
wait in minutes.

If you enter the invalid number,
move the cursor to the desired
digit by pressing

and

correct the number.

To Set Alarm

To Choose Alert Type for Message Receiving

When a message is received, the phone can alert
you with the alert type chosen every 2 minutes
until the message is checked.

You can set the phone to sound an alarm at an
appointed time. If you set an alarm time, the phone
will sound an alarm automatically at the appointed
time.

Setting Alarm

SCH-670 (46-73) 11/23/98 3:29 PM Page 10

Summary of Contents for SCH-670


















































Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands

Samsung SCH-670, Owner'S Manual

Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands