Samsung SCH-670 Owner'S Manual Download Page 11

Page: 11 / 49

1. Press:

◆

FCN

followed by

◆

Numeric buttons

and

Result:

The alert type currently

selected is displayed.

You can choose a call alert type that informs you of
an incoming call. There are bell, lamp indication, or
vibration modes.

2. Press

until the desired mode

is displayed.

Result:

The alert types you can choose

are displayed:

◆

BELL : the bell sounds and the
receiving lamp flickers.

◆

VIBRATOR : the phone vibrates and
the receiving lamp flickers.

◆

LAMP : the receiving lamp flickers.

◆

VIB+BELL : the phone vibrates
three times, then the bell sounds
and the receiving lamp flickers.

Recording the Other Person’s Talking
During Telephone Conversation

Choosing Alert Type

1. To record, press

FCN

during a

telephone conversation.

2. Press numeric button

. The LCD

displays

’Recording’

3. The recording is stored in 10-second

memory, so it is recommened to
record shorter than 10 seconds. The
recording will stop automatically after
10 seconds.

4. To listen to the recording, press

FCN

in Standby mode, then press numeric
buttons

and

3. Press

STO

Result:

◆

appears if the LAMP mode is

selected.

◆

appears if the VIBRATOR or

VIB+BELL mode is selected.

• When you use the hands-free kit, you cannot choose the

VIBRATOR, LAMP or VIB+BELL indication modes.

• The VIBRATOR and VIB+BELL mode are not available in some

countries.

SCH-670 (20-45) 11/23/98 3:26 PM Page 2

Summary of Contents for SCH-670


















































Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands

Samsung SCH-670, Owner'S Manual

Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands