Samsung SCH-670 Owner'S Manual Download Page 10

Page: 10 / 49

This feature allows you to mute the phone’s
microphone, so you can have a private
conversation with someone without the person at
the other end listening.

☞

This function is only available during a telephone conversation.

1. Press

FCN

while you are over the

phone.

2. Press numeric button

Result:

The message

M U T E

displayed. The person you’re talking to
can no longer hear you, but you can
hear your correspondent.

3. Press

FCN

and numeric button

again when you wish to resume the
conversation with your party.

Result:

The message

M U T E

disappears on the display and you can
speak with your party.

Adjusting Volumes

You can adjust the volume of the sounds generated
on your phone.

Keytone Volume

☞

This function is only available in standby mode.

Mute

Speaker Volume

☞

This function is only available during a telephone conversation.

2. Press

until you reach the

desired volume level.

Press

FCN

twice and then press

until you reach the desired

volume level.

Ringer Volume

☞

This function is only available in standby mode.

1. Press:

◆

FCN

followed by

◆

Numeric buttons

and

2. Press

until you reach the

desired volume level.

1. Press

◆

FCN

followed by

◆

Numeric buttons

and

SCH-670 (1-19) 11/23/98 3:17 PM Page 18

Summary of Contents for SCH-670


















































Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands

Samsung SCH-670, Owner'S Manual

Search results

Summary of Contents for SCH-670

Reviews:

Related manuals for SCH-670

Brands by name

Popular brands