Samsung SCD77 Page 64 Owner'S Instruction Book Download

Page: 64 / 102

ENGLISH

Advanced Recording

Taking still pictures

1. Press the PHOTO button.

■

The still picture appears on the LCD monitor or viewfinder.

■

To quit the PHOTO mode without recording, press the PHOTO button again.

2. Press the START/STOP button.

■

The still picture (with sound) is recorded for about 8 seconds.

3. After the PHOTO recording, PHOTO mode is canceled.

Notes

■

To record the still picture with audio, you must press the START/STOP button.

■

If you press the PHOTO button in the GHOST or PIP mode, the GHOST or PIP mode will be shut off.

■

If you use the PHOTO function, the picture quality may deteriorate.

Searching for PHOTO picture

✤

PHOTO SEARCH works in the PLAYER mode only.

1. Press the MENU ON/OFF button.

■

The menu list will appear.

2. Turn the MENU DIAL to highlight PHOTO SEARCH.

3. Press ENTER to enter the sub-menu.

4. Using the MENU DIAL, select the search direction

■

Press the ENTER button.

■

After searching, the camcorder displays the still image and the screen will automatically return to main menu.

5. To exit, press the MENU ON/OFF button.

●

PHOTO SEARCH

●

SP STILL

FF
REW
RETURN

SEL.:ENTER

: MENU

Summary of Contents for SCD77







































































































Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands

Samsung SCD77, Owner'S Instruction Book

Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands