Samsung SCD77 Page 61 Owner'S Instruction Book Download

Page: 61 / 102

ENGLISH

Advanced Recording

Audio dubbing

✤

The AUDIO DUBBING function only works in PLAYER Mode.

✤

You can add sound to the original sound on a pre-recorded tape, recorded in the SP mode with 12bit sound.

✤

Use the internal, or an external microphone.

✤

The original sound will not be erased.

Dubbing sound with microphone

1. Set the camcorder to PLAYER mode

■

If you want to use the external microphone, connect the microphone
to the external MIC input on the camcorder.

2. Press (PLAY/STILL) button and find the start position of the scene to be dubbed.

3. Press (PLAY/STILL) button to pause the scene.

4. Press the A.DUB button on the Remote Control.

■

A.DUB will be displayed in the LCD.

■

The camcorder is in a ready-to-dub state.

5. Press the

(PLAY/STILL) button to start.

Press the

■

(STOP) button to stop the dubbing.

Note

■

You can not dub sound on a pre-recorded tape recorded in LP mode or 16 bit mode.

START/

STOP

SELF

TIMER

SLOW

F.ADV

A.DUB

ZERO

MEMORY

WIDE

TELE

STILL

PHOTO

DISPLAY

PLAY/
STILL

A.DUB

Summary of Contents for SCD77







































































































Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands

Samsung SCD77, Owner'S Instruction Book

Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands