manualshive.com logo in svg

Samsung SCD77, Owner'S Instruction Book

Share
Download
Samsung SCD77 Owner'S Instruction Book Download Page 60

ENGLISH

56

Advanced Recording

✤

The FADE function works in CAMERA mode only.

✤

You can give your films a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a
sequence.

To Start Recording

1. Before recording, hold down the FADE button.

The picture and sound gradually disappear (fade out).

2. Press the START/STOP button and at the same time release the FADE button.

Recording starts and the picture and sound gradually appear (fade in).

To Stop Recording (use FADE IN / FADE OUT)

3. When you wish to stop recording, hold down the FADE button.

The picture and sound gradually disappear (fade out).

4.  When the picture has disappeared, press the START/STOP button  

to stop recording.

a. FADE OUT

(Approx. 4 seconds)

b. FADE IN

(Approx. 4 seconds)

Fade In and Out

➔

➔

➔

➔

STBY

0:00:00

REC

0:00:15

REC

0:00:15

STBY

0:00:15

➔

➔

➔

➔

Press the FADE button

a. FADE OUT 

Gradual disappearance

Gradual appearance

b. FADE IN

Release the FADE button

FADE

FADE

Summary of Contents for SCD77







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands