Samsung SCD77 Owner'S Instruction Book Download

Page: 57 / 102

ENGLISH

Advanced Recording

CUSTOM Mode

✤

You can customize settings and save them for future use.

■

The CUSTOM SET function operates in CAMERA mode only.

✤

Please set custom settings before using this function. (see page 34)

1. Set the power switch to CAMERA mode.

2. To activate the CUSTOM function, press the CUSTOM button.

■

“CUSTOM” will be displayed on the screen.

3. Press START/STOP to start recording.

■

Recording will begin using the CUSTOM settings.

4. To switch the CUSTOM mode off, press the CUSTOM button again.

■

The camcorder will revert to the settings that were set prior to the custom mode being selected.

Notes

■

Once settings have been made in the Custom mode, you must turn the Custom mode off to make
changes to these settings.

■

The CUSTOM settings will be stored in the camera (providing a good lithium battery has been installed).

CUSTOM SP STBY

0:00:00

63MIN

CUSTOM

Summary of Contents for SCD77







































































































Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands

Samsung SCD77, Owner'S Instruction Book

Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands