Samsung SCD77 Page 56 Owner'S Instruction Book Download

Page: 56 / 102

ENGLISH

Advanced Recording

✤

Even a beginner can make a recording using the EASY mode.

■

The EASY mode only operates in CAMERA mode.

1. Set the power switch to CAMERA mode.

2. By pressing the EASY button, all the functions on the camera will be set to off and

the recording settings will be set to the following basic mode.

■

Battery level, recording mode, counter, DATE/TIME, DIS ( ) will be displayed.

■

The word “EASY” will appear on the LCD at the same time.
The DATE/TIME will only be seen if it has been set and turned on in the menu.
(see page 49)

3. Press START/STOP to start recording.

■

Recording will begin using the basic automatic settings.

4. Pressing the EASY button again turns the EASY mode off.

■

The camera will return to the settings that were set prior to the EASY mode being switched on.

Notes

■

In the EASY mode, BLC, FADE, MF/AF and all MENU functions are not available.
– If you want to use these functions, you must first switch the EASY mode off.

■

The EASY mode settings are stored in the camera (provided a good lithium battery has been installed).

EASY Mode (for Beginners)

EASY SP STBY

0:00:00

63MIN

EASY

Summary of Contents for SCD77







































































































Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands

Samsung SCD77, Owner'S Instruction Book

Search results

Summary of Contents for SCD77

Reviews:

Related manuals for SCD77

Brands by name

Popular brands