Samsung SCB-1000, User Manual

Page: 26 / 40

26_ camera operation
camera operation
5) When a name has been chosen, please
select a position for the name display.
➊
Please move the cursor onto ‘POS’ and
then press the SETUP button.
➋
The name will appear at the top left hand
corner.
➌
Please find the position you wish to
display the name by using the 4 directional buttons, and then press the
SETUP button.
6) Please select ‘END’ and then press the SETUP button to complete ID input.
COLOR (Electronic DAY & NIGHT) :
AUTO : This camera has a function which electronically changes to the
appropriate mode for daytime or night-time. The COLOR mode is
operated for daytime, and it converts to BW mode for night-time.
ON : The color mode is selected electronically.
If AGC is OFF, you can´t select AUTO mode.
When an infrared light is used, there may be a problem with focusing and COLOR (DAY & NIGHT).
SYNC :
Two SYNCHRONIZATION modes are
available INTERNAL and EXTERNAL LINE-
LOCK. In LINE-LOCK mode, it synchronizes
the video signal between cameras without
a synchronous generator. The line-lock
synchronization is only used in the areas of
60Hz (NTSC Models) / 50Hz (PAL Models).
INT : Internal synchronization
LL : External line-lock synchronization
If you choose ‘LL’, you can adjust the desired phase. Press the SET
button.
You can adjust the desired phase from 0 to 359.
When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models).
When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models).
‘Sync.’ mode is fi xed to ‘INT’ in DC 12V input power.
y
-
-


y
-
-
y
y



FRONT DOOR
SYNC
PHASE
I
IIIIIIIIIIIIIIIIIIIIIIIIIIIIII
I
0