Samsung SCB-1000, User Manual

Page: 19 / 40

English_19
●
CAMERA OPERATION
Select a desired function using the Up and Down buttons.
Place the cursor over a desired item.
Set up a selected item by using the Left and Right buttons.
To fi nish the setting, select ‘EXIT’ and press the SET button.
If appears at the mode you wish to operate, it means that there is a sub-menu which can be
selected by pressing the SETUP button.
If - - - appears at the mode item, it means that there is no mode available to be selected.
LENS (SELECTION)
This function is used to adjust the brightness of the screen.
When the SETUP menu is displayed on the
screen, please position the arrow to point to
‘LENS’ by using the UP and DOWN buttons.
Please select the type of the lens you wish to
use by pressing the LEFT or RIGHT button.
DC/VIDEO : Auto iris lens selection
When using an auto iris lens, the setting of the auto iris lens selection switch, located on the
back of the camera, must be on DC or VIDEO depending on the type of the lens which is being
used. (Please refer to the picture on page 13)
The brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within
the range of 1 ~ 70. The optimum level of brightness for the user can be achieved by adjustment.
MANUAL : Manual lens selection
Please press the SETUP button if you wish to return to the previous menu.
2.
y
3.
4.


1.
2.
y


y
3.
SETUP
䯝
LENS DC
SHUTTER ---
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
SSNR LOW
SENS-UP OFF
SPECIAL
EXIT
Modes can be
changed using the
LEFT and RIGHT
buttons. Select any function
you wish to operate
by using the UP and
DOWN buttons.
SETUP
䯝
LENS DC
SHUTTER ---